PVDF Molding Grade

group name: PVDF

Min Order: 100 kilogram

brand name: Fotech

Nearest port for product export: NINGBO, SHANGHAI

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW, CIP, FCA, CPT, DDP, DDU, Express Delivery

Acceptable payment methods: T/T, L/C, D/P D/A

Export mode: Have the independent export and import right

update time: Thu, 21 Nov 2024 17:45:50 GMT

contact supplier

Paramtents

CAS No. 24937-79-9
Type Synthetic Resin and Plastics
Purity 99%

Packging & Delivery

Min Order100 kilogram

Briefing

PVDF is a highly non-reactive and pure thermoplastic fluoropolymer produced by the polymerization of vinylidene difluoride.

Detailed

PVDF Molding Grade FTH-213

1. Characteristic

Physical properties	Specification	ASTM Test standard
MFR(g/10min)	1～6	ASTM D1238, 230⁰C/12.5kg
Appearance	White and semi-transparent pellets	/
Density(g/cm³)	1.77～1.79	ASTM D792, @23/23⁰C
Water absorption (%)	≤0.05	ASTM D570
Mechanical properties
Tensile yield strength(Mpa)	≥40	ASTM D638 50mm/min@230C
Yield elongation (%)	5-20
Tensile strength(Mpa)	≥35
Elongation at break (%)	≥30
Hardness(Shore D)	70-80
Thermal properties
Melting point(⁰C)	165~175	ASTM D3418,10⁰C/min

2. Process safety instructions

(1). This product should be processed under 370℃,to avoid producing toxic gases；

(2). PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds；

(3). Operators should take good care of personal protection during the use procedure and processing.

3. Packaging and storage

(1). PVDF is sealed in plastic bag with 25kg net weight per bag and then put into drum or cardboard.

(2). It must be stored in clean, cool, dry place.